NSN 1650-01-350-7619
Part Details | FLUID FILTER ELEMENT
1650-01-350-7619 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
Alternate Parts: R9W2332826, R9W2332-826, 747985 FIND 62, 59081182, 5908118-2, 5908118, 1650-01-350-7619, 01-350-7619, 1650013507619, 013507619
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 16 | DEC 20, 1991 | 01-350-7619 | 32624 ( FILTER ELEMENT, FLUID ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/OUT CONTAINER
Cross Reference | NSN 1650-01-350-7619
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| R9W2332-826 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
| 747985 FIND 62 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 5908118-2 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 5908118 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 1650-01-350-7619
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| BODY DIAMETER | 0.675 INCHES NOMINAL |
| BODY OVERALL LENGTH | 2.408 INCHES NOMINAL |
| DESIGN TYPE | REUSABLE |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| MEDIA FOR WHICH DESIGNED | Y ANY ACCEPTABLE |
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
| DIFFERENTIAL PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| SPECIAL FEATURES | CAPPED ON BOTTOM OF ELEMENT; 0.188 IN. WIDE 0.501 IN. DIA SEAL RING GROOVE 0.218 FROM TOP EDGE OF ELEMENT TO CENTER OF GROOVE |