NSN 3040-00-432-1880
Part Details | STRAIGHT SHAFT
3040-00-432-1880 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 9M1996, 3040-00-432-1880, 00-432-1880, 3040004321880, 004321880
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 12, 1971 | 00-432-1880 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-432-1880
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9M1996 | 11083 | CATERPILLAR INC.DBA CATERPILLAR |
Technical Data | NSN 3040-00-432-1880
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE FINISH | 14.0 MICROINCHES |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 1.5100 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.1400 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.460 INCHES NOMINAL |
| FIRST END DIAMETER | 1.3880 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 1.3880 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.2656 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 1.388 INCHES NOMINAL |
| OVERALL LENGTH | 4.440 INCHES NOMINAL |