NSN 3040-00-529-6578
Part Details | STRAIGHT SHAFT
3040-00-529-6578 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: GAA7510B, GAA7510B, GAA7510B, 5296578, 3040-00-529-6578, 00-529-6578, 3040005296578, 005296578
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-529-6578 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
TONGUE
CIRCULAR GROOVED
TONGUE
Cross Reference | NSN 3040-00-529-6578
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GAA7510B | 23040 | FORD MOTOR COFORD PARTS AND SERVICE DIV |
| GAA7510B | 57526 | FORD MOTOR COMPANY |
| GAA7510B | 22852 | SPALLA INC |
| 5296578 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-529-6578
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4027 |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 0.0650 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.7900 INCHES MINIMUM AND 0.7950 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.800 INCHES NOMINAL |
| FIRST END DIAMETER | 0.8760 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 TONGUE |
| SECOND END FLAT DEPTH | 0.0800 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.150 INCHES NOMINAL |
| SECOND END GROOVE WIDTH | 0.0650 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.7900 INCHES MINIMUM AND 0.7950 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.800 INCHES NOMINAL |
| SECOND END DIAMETER | 0.8760 INCHES NOMINAL |
| OVERALL LENGTH | 4.860 INCHES NOMINAL |
| FSC APPLICATION DATA | CLUTCH RELEASE,COMBAT VEHICLE |