NSN 3040-00-613-2852
Part Details | STRAIGHT SHAFT
3040-00-613-2852 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 9032151, 3040-00-613-2852, 00-613-2852, 3040006132852, 006132852
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-613-2852 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-613-2852
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9032151 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 3040-00-613-2852
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1018 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 4 TAPERED WITH FLAT |
| FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.312 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.230 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 32.250 INCHES NOMINAL |
| SPECIAL FEATURES | ONE ADDITIONAL,IDENT THD CROSS DRILLED HOLE LOCATED ON EA END W/90 DEG ANGLE BTWN HOLES;EA END HAS A BORE,0.312/0.316 IN. BORE DIA,1.500 IN. BORE DP |