NSN 3040-00-722-3631
Part Details | REMOTE CONTROL LEVER
3040-00-722-3631 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
Alternate Parts: 2590007223631, 10891649, 3040-00-722-3631, 00-722-3631, 3040007223631, 007223631
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-722-3631 | 22099 ( LEVER, REMOTE CONTROL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-00-722-3631
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2590007223631 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 10891649 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-722-3631
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE TREATMENT | PHOSPHATE |
| OVERALL WIDTH | 5.969 INCHES MINIMUM AND 6.000 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 8.500 INCHES NOMINAL |
| SHAFT END THICKNESS | 2.250 INCHES NOMINAL |
| LINK END THICKNESS | 3.697 INCHES NOMINAL |
| LINK END HOLE DIAMETER | 1.505 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| DISTANCE BETWEEN FORK INSIDE SPREAD | 1.697 INCHES MINIMUM AND 1.702 INCHES MAXIMUM |
| BORE TYPE | SPLINED |
| MAJOR DIAMETER | 4.524 INCHES MINIMUM AND 4.539 INCHES MAXIMUM |
| MINOR DIAMETER | 4.300 INCHES MINIMUM AND 4.325 INCHES MAXIMUM |
| SHAFT SECURING METHOD | SPLINE |
| SPLINE QUANTITY | 44 |
| SPECIAL FEATURES | OFFSET HEIGHT: 0.723 IN. NOMINAL |
| END ITEM IDENTIFICATION | SPADE, LOCKOUT CYLINDER, VEHICULAR |