NSN 3040-00-808-6776
Part Details | STRAIGHT SHAFT
3040-00-808-6776 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 10925502, 3040-00-808-6776, 00-808-6776, 3040008086776, 008086776
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 03, 1968 | 00-808-6776 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TONGUE
TONGUE
Cross Reference | NSN 3040-00-808-6776
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10925502 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-808-6776
| Characteristic | Specifications |
|---|---|
| MATERIAL | 5$8$DST1040 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END STYLE | 8 TONGUE |
| FIRST END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| FIRST END SLOT DEPTH | 1.000 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.390 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.5000 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 TONGUE |
| SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| SECOND END SLOT DEPTH | 1.125 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.600 INCHES MINIMUM AND 0.605 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| OVERALL LENGTH | 7.438 INCHES NOMINAL |
| SPECIAL FEATURES | ADDITIONAL CROSS DRILLED THROUGH HOLE FIRST END,BOTH HOLES IN LINE;TWO FLATS SECOND END,1.125IN. FLAT LG,180 DEG ANGLE BETWEEN FLATS;SHAFT CHROMIUM PLATED QQ-C-320 |