NSN 3040-00-849-6315

Part Details | STRAIGHT SHAFT

3040-00-849-6315 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Alternate Parts: LS1673311, LS1673-3-11, LS1673311, LS1673-3-11, 3040-00-849-6315, 00-849-6315, 3040008496315, 008496315

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30JAN 11, 196700-849-631522109 ( SHAFT, STRAIGHT )
REFERENCE DRAWINGS & PICTURES

CIRCULAR GROOVED

CIRCULAR GROOVED

Cross Reference | NSN 3040-00-849-6315
Part Number Cage Code Manufacturer
LS1673-3-1170265ALL-POWER MANUFACTURING CO.INC.
LS1673-3-1198897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
Technical Data | NSN 3040-00-849-6315
Characteristic Specifications
MATERIAL STEEL COMP 8630
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6050,PHYSICAL AND SURFACE CONDITION,A/A MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE FINISH100.0 MICROINCHES
FIRST END STYLE CIRCULAR GROOVED
FIRST END GROOVE WIDTH0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM
FIRST END GROOVE DIAMETER0.1740 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FIRST END DIAMETER0.1890 INCHES NOMINAL
END SIMILARITY IDENTICAL
OVERALL LENGTH0.688 INCHES NOMINAL