NSN 3040-00-880-4459
Part Details | STRAIGHT SHAFT
3040-00-880-4459 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 11601301, 3040-00-880-4459, 00-880-4459, 3040008804459, 008804459
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 10, 1967 | 00-880-4459 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TONGUE
TONGUE
Cross Reference | NSN 3040-00-880-4459
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11601301 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-880-4459
| Characteristic | Specifications |
|---|---|
| MATERIAL | 9$DST0137$DST0138 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | 2 TONGUE |
| FIRST END FLAT DEPTH | 0.0620 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 2.812 INCHES NOMINAL |
| FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 3.579 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.343 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 TONGUE |
| SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| SECOND END SLOT DEPTH | 1.075 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.3280 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 11.000 INCHES NOMINAL |
| SPECIAL FEATURES | CASE HARDENED ROCKWELL C 58-66 O/A;ONE INDETED FLAT W/3 NOTCHES AT SHAFT CENTER |