NSN 3040-00-993-5982
Part Details | STRAIGHT SHAFT
3040-00-993-5982 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: L340005063, 20421433, 2042143-3, 3040-00-993-5982, 00-993-5982, 3040009935982, 009935982
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 28, 1967 | 00-993-5982 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-993-5982
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| L340005063 | 36090 | LOCKHEED MARTIN LIBRASCOPECORP |
| 2042143-3 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-00-993-5982
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 416 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-753,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 0.0350 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.1500 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.379 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1873 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.1873 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.253 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.1625 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.1875 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.1750 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 14 |
| OVERALL LENGTH | 0.925 INCHES NOMINAL |