NSN 3040-01-054-9652
Part Details | STRAIGHT SHAFT
3040-01-054-9652 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 80600034861, 8060003486-1, 8060003486, 3040-01-054-9652, 01-054-9652, 3040010549652, 010549652
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 29, 1978 | 01-054-9652 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TONGUE
PLAIN
TONGUE
Cross Reference | NSN 3040-01-054-9652
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8060003486-1 | 57057 | NAVCOM DEFENSE ELECTRONICS, INC. |
| 8060003486 | 57057 | NAVCOM DEFENSE ELECTRONICS, INC. |
Technical Data | NSN 3040-01-054-9652
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 10.0 MICROINCHES |
| FIRST END STYLE | PLAIN |
| FIRST END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 TONGUE |
| SECOND END FLAT DEPTH | 0.0159 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.715 INCHES NOMINAL |
| SECOND END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.1135 INCHES MINIMUM AND 0.1165 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.027 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| OVERALL LENGTH | 2.184 INCHES MINIMUM AND 2.196 INCHES MAXIMUM |
| SPECIAL FEATURES | SECOND END HAS ONE ADDITIONAL CIR GROOVE,0.019 IN. GROOVE W,0.096 IN. GROOVE DIA,0.731 IN. DISTANCE FROM END TO GROOVE |