NSN 3040-01-105-0611
Part Details | STRAIGHT SHAFT
3040-01-105-0611 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: GP67125 X 62518, GP67-125 X 625-18, 54282262, 5428226-2, 3040-01-105-0611, 01-105-0611, 3040011050611, 011050611
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 16, 1980 | 01-105-0611 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
SPLINED (STRAIGHT)
CIRCULAR GROOVED
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-105-0611
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GP67-125 X 625-18 | 73957 | GROOV-PIN CORPORATION |
| 5428226-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-105-0611
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 0.0650 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.0830 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.049 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.303 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.1330 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 6 |
| OVERALL LENGTH | 0.625 INCHES NOMINAL |