NSN 3040-01-148-2797
Part Details | STRAIGHT SHAFT
3040-01-148-2797 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 12279044, 3040-01-148-2797, 01-148-2797, 3040011482797, 011482797
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 03, 1983 | 01-148-2797 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-148-2797
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12279044 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 3040-01-148-2797
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,CL 303,COND A ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | 8 PLAIN |
| FIRST END DIAMETER | 0.3747 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.608 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2390 INCHES MINIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.3090 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.2916 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 14 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 9 TAPERED WITH FLAT |
| SECOND END FLAT DEPTH | 0.0628 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 1.250 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3747 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 8.030 INCHES NOMINAL |