NSN 3040-01-165-5900
Part Details | STRAIGHT SHAFT
3040-01-165-5900 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 74A7335922001, 74A733592-2001, 74A7335922001, 74A733592-2001, 74A33592, 74A7335922001, 74A733592-2001, 3040-01-165-5900, 01-165-5900, 3040011655900, 011655900
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 31, 1983 | 01-165-5900 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
WOODRUFF KEYWAY
PLAIN
WOODRUFF KEYWAY
Cross Reference | NSN 3040-01-165-5900
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 74A733592-2001 | 8V613 | BOEING COMPANY, THEDBA BOEING |
| 74A733592-2001 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 74A33592 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 74A733592-2001 | 88314 | MCDONNELL DOUGLAS CORPMCDONNELL DOUGLAS-TULSA |
Technical Data | NSN 3040-01-165-5900
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | PLAIN |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 WOODRUFF KEYWAY |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1270 INCHES MINIMUM AND 0.1330 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.175 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN HOLE CENTERS | 0.980 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| OVERALL LENGTH | 5.130 INCHES NOMINAL |