NSN 3040-01-182-4351
Part Details | STRAIGHT SHAFT
3040-01-182-4351 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 7217236309, 7-217236309, 7217236309, 7-217236309, 3040-01-182-4351, 01-182-4351, 3040011824351, 011824351
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 23, 1984 | 01-182-4351 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-182-4351
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7-217236309 | 8V613 | BOEING COMPANY, THEDBA BOEING |
| 7-217236309 | 02731 | MCDONNELL DOUGLAS HELICOPTER CO INC |
Technical Data | NSN 3040-01-182-4351
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4130 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6753 COND D1 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | CIRCULAR GROOVED |
| FIRST END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0293 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.3500 INCHES MINIMUM AND 0.3540 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.131 INCHES NOMINAL |
| FIRST END DIAMETER | 0.3737 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 3.140 INCHES NOMINAL |