NSN 3040-01-185-5385
Part Details | STRAIGHT SHAFT
3040-01-185-5385 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 9P20, 9P-20, 328775X, 328-775X, 10900574, 3040-01-185-5385, 01-185-5385, 3040011855385, 011855385
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 31, 1984 | 01-185-5385 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLAT KEYWAY
TAPERED WITH FLAT
FLAT KEYWAY
Cross Reference | NSN 3040-01-185-5385
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9P-20 | 11757 | PARKER-HANNIFIN CORPORATIONDBA CHELSEA PRODUCTS DIVISION |
| 328-775X | 11757 | PARKER-HANNIFIN CORPORATIONDBA CHELSEA PRODUCTS DIVISION |
| 10900574 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-185-5385
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END STYLE | TAPERED WITH FLAT |
| FIRST END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 2.094 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0730 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.437 INCHES NOMINAL |
| SECOND END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.0230 INCHES MINIMUM AND 1.0800 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 10 |
| OVERALL LENGTH | 7.125 INCHES NOMINAL |
| SPECIAL FEATURES | SECOND END HAS PARIAL BORE WITH UNTHREADED 0.156 INCH DIAMETER LOCATED ON ONE SIDE |