NSN 3040-01-422-4102
Part Details | STRAIGHT SHAFT
3040-01-422-4102 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 29510181, 29510181, 3040-01-422-4102, 01-422-4102, 3040014224102, 014224102
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 01, 1995 | 01-422-4102 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-422-4102
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 29510181 | 73342 | ALLISON TRANSMISSION, INC. |
| 29510181 | T0534 | HEMA DISLI SANAYI VE TIC.A.S. |
Technical Data | NSN 3040-01-422-4102
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FIRST END STYLE | 8 PLAIN |
| FIRST END DIAMETER | 0.9400 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.0300 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.9650 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.1150 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 1.0625 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 17 |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 3.9600 INCHES NOMINAL |
| SPECIAL FEATURES | GROOVED ON EACH END 0.108MAX W.,1.0390 MAX. OD. |
| END ITEM IDENTIFICATION | 2520-01-397-1074 |