NSN 3040-01-449-0218
Part Details | SPUR GEARSHAFT
3040-01-449-0218 A gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
Alternate Parts: 2D300293 IT NO 5, 2D3-00293 IT NO 5, 2D103978, 2D1-03978, 3040-01-449-0218, 01-449-0218, 3040014490218, 014490218
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 17, 1997 | 01-449-0218 | 60541 ( GEARSHAFT, SPUR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-449-0218
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2D3-00293 IT NO 5 | 34712 | OLDENBURG GROUP INCORPORATEDDBA OLDENBURG - LAKE SHORE |
| 2D1-03978 | 34712 | OLDENBURG GROUP INCORPORATEDDBA OLDENBURG - LAKE SHORE |
Technical Data | NSN 3040-01-449-0218
| Characteristic | Specifications |
|---|---|
| SHAFT MATERIAL | STEEL COMP 4820 |
| GEAR MATERIAL | STEEL COMP 4820 |
| HARDNESS RATING AND LOCATION | RCBBAY55.0 ROCKWELL C MAXIMUM AND BAY60.0 ROCKWELL C MAXIMUM |
| PRESSURE ANGLE | 25.0000 DEGREES |
| TEETH QUANTITY | 25 |
| GEAR OUTSIDE DIAMETER | 8.988 INCHES MINIMUM AND 9.000 INCHES MAXIMUM |
| DIAMETRAL PITCH | 3 |
| FACE WIDTH | 6.250 INCHES NOMINAL |
| OVERALL LENGTH | 16.250 INCHES NOMINAL |
| SHAFT TYPE | SHOULDERED |
| SHAFT LARGEST DIAMETER | 4.750 INCHES NOMINAL |
| GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| LONGER SHAFT SEGMENT LENGTH | 4.000 INCHES NOMINAL |
| SHAFT END TYPE | PLAIN AND PLAIN |
| SHAFT END SIZE | 3.545 INCHES AND 3.545 INCHES |
| SPECIAL FEATURES | SPHERICAL ROLLER BEARING ON EACH SHAFT END; KEYWAY LOCATED IN LARGEST SHAFT OD 1.25 WIDE BY .625 DEEP |
| END ITEM IDENTIFICATION | GSTRATEGIC SEALIFT CONVERSION SHIPS CLASS |