NSN 3040-01-449-1766
Part Details | SPUR GEARSHAFT
3040-01-449-1766 A gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
Alternate Parts: 2E300292 IT NO 3, 2E3-00292 IT NO 3, 2C104782, 2C1-04782, 3040-01-449-1766, 01-449-1766, 3040014491766, 014491766
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 22, 1997 | 01-449-1766 | 60541 ( GEARSHAFT, SPUR ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-449-1766
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2E3-00292 IT NO 3 | 34712 | OLDENBURG GROUP INCORPORATEDDBA OLDENBURG - LAKE SHORE |
| 2C1-04782 | 34712 | OLDENBURG GROUP INCORPORATEDDBA OLDENBURG - LAKE SHORE |
Technical Data | NSN 3040-01-449-1766
| Characteristic | Specifications |
|---|---|
| SHAFT MATERIAL | STEEL COMP 4820 |
| GEAR MATERIAL | STEEL COMP 4820 |
| HARDNESS RATING AND LOCATION | RCBBAY58.0 ROCKWELL C MAXIMUM AND BAY62.0 ROCKWELL C MAXIMUM |
| PRESSURE ANGLE | 25.0000 DEGREES |
| TEETH QUANTITY | 17 |
| GEAR OUTSIDE DIAMETER | 7.588 INCHES MINIMUM AND 7.600 INCHES MAXIMUM |
| DIAMETRAL PITCH | 2.5 |
| FACE WIDTH | 6.250 INCHES NOMINAL |
| OVERALL LENGTH | 20.625 INCHES NOMINAL |
| SHAFT TYPE | SHOULDERED |
| SHAFT LARGEST DIAMETER | 5.250 INCHES NOMINAL |
| GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| LONGER SHAFT SEGMENT LENGTH | 11.375 INCHES NOMINAL |
| SHAFT END TYPE | PLAIN AND PLAIN |
| SHAFT END SIZE | 3.938 INCHES AND 3.938 INCHES |
| SPECIAL FEATURES | BEARING INCLUDED ON GEAR SHAFT END; KEYWAY INCLUDED 1.250 IN. WIDE BY .625 IN. DEEP |
| END ITEM IDENTIFICATION | STRATEGIC SEALIFT CONVERSION SHIPS CLASS |