NSN 3040-01-467-1238
Part Details | STRAIGHT SHAFT
3040-01-467-1238 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 12374300, 12374300, 12374300, 3040-01-467-1238, 01-467-1238, 3040014671238, 014671238
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 16, 1999 | 01-467-1238 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
INTERNAL THREADED
INTERNAL THREADED
Cross Reference | NSN 3040-01-467-1238
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12374300 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
| 12374300 | 01365 | MARINE CORPS LOGISTICS COMMANDTECHNICAL DATA REPOSITORY |
| 12374300 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-01-467-1238
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | INTERNAL THREADED |
| FIRST END DIAMETER | 1.9990 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 1.500 INCHES MINIMUM |
| END SIMILARITY | IDENTICAL |
| OVERALL LENGTH | 10.730 INCHES MINIMUM AND 10.770 INCHES MAXIMUM |
| SPECIAL FEATURES | HEAT TREAT PER MIL-H-6875 QUENCH AND TEMPER TO 40-45 ROCKWELL C; SHAFT 1.99 +OR- .001 IN DIA OD REAMED THRU ENTIRE LENGTH 1.80 +OR- .02 IN DIA ID; BOTH ENDS THREADED 1.750-5 UN-2B; ONE .424 +OR- .008 DIA HOLE DRILLED THRU 5.375 IN FROM 1ST END; END TWO SAME AS ONE EXCEPT CHAMFERED @ 45 DEG; FINISH-ELECTROLESS NICKLE COATING; NEXT HIGHER ASSY-EQUILIBRATOR,CANNON-NSN 1005-01-466-7532 |
| END ITEM IDENTIFICATION | LAV-AD; NSN 2320-01-123-1610 |