NSN 3040-01-484-0878
Part Details | STRAIGHT SHAFT
3040-01-484-0878 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 6722635, 1226722635 PC 11, 122-6722635 PC 11, 3040-01-484-0878, 01-484-0878, 3040014840878, 014840878
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 18, 2001 | 01-484-0878 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-484-0878
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6722635 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 122-6722635 PC 11 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-484-0878
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-1222, GR B7 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END STYLE | PLAIN |
| FIRST END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7455 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.7450 INCHES MINIMUM AND 0.7455 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 6.250 INCHES NOMINAL |
| SPECIAL FEATURES | PLAIN END DRILLED AT ASSEMBLY FOR ROLL PIN. 0.2656 IN. DIA. HOLE CROSSDRILLED NEAR CENTER OF SHAFT FOR SECURING PIN. PART OF AIRCRAFT ELEVATOR DOOR LOCKING MECHANISM |
| END ITEM IDENTIFICATION | AIRCRAFT CARRIER, CVN74 |