NSN 3040-01-485-7746
Part Details | REMOTE CONTROL LEVER
3040-01-485-7746 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
Alternate Parts: 5589567, 1225589567 PC 8, 122-5589567 PC 8, 1225589566 PC 19, 122-5589566 PC 19, 3040-01-485-7746, 01-485-7746, 3040014857746, 014857746
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 06, 2001 | 01-485-7746 | 22099 ( LEVER, REMOTE CONTROL ) |
REFERENCE DRAWINGS & PICTURES
FLAT, ONE HOLE LINK END
Cross Reference | NSN 3040-01-485-7746
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5589567 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 122-5589567 PC 8 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 122-5589566 PC 19 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-485-7746
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22698 GR AH36 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | FLAT, ONE HOLE LINK END |
| OVERALL WIDTH | 3.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 6.000 INCHES NOMINAL |
| SHAFT END THICKNESS | 2.000 INCHES NOMINAL |
| LINK END THICKNESS | 1.000 INCHES NOMINAL |
| LINK END HOLE DIAMETER | 1.250 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| BORE TYPE | PLAIN STRAIGHT |
| BORE DIAMETER | 1.406 INCHES MINIMUM AND 1.409 INCHES MAXIMUM |
| BORE LENGTH | 2.000 INCHES NOMINAL |
| SPECIAL FEATURES | NHA, HATCHES, BALLISTIC, 4TH DECK L.S. WEAPONS ELEVATOR;SECURING METHOD, WITH DOG AND DOG ARM ASSEMBLED IN CORRECT POSITION DRILL TWO HOLES 0.500 IN MIN 0.5156 IN MAX 180 DEGREES APART, HALF OF HOLE IS IN SHAFT AND HALF IS IN DOG ARM. |
| END ITEM IDENTIFICATION | AIRCRAFT CARRIER CVN 71 |