NSN 3040-01-494-3543
Part Details | HELICAL GEARSHAFT
3040-01-494-3543 A gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
Alternate Parts: H83216623, H832-1662-3, 71081153, 7108115-3, 7068477, 75270684773, 752-7068477-3, 3040-01-494-3543, 01-494-3543, 3040014943543, 014943543
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 08, 2002 | 01-494-3543 | 60539 ( GEARSHAFT, HELICAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-494-3543
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H832-1662-3 | 96169 | ELECTRIC BOAT CORPORATION |
| 7108115-3 | 5G804 | ILLINOIS TOOL WORKS INC.DBA ITW SPIROID DIVISION |
| 7068477 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 752-7068477-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-494-3543
| Characteristic | Specifications |
|---|---|
| SHAFT MATERIAL | STEEL COMP E9310 |
| GEAR MATERIAL | STEEL COMP E9310 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH DIRECTION | RIGHT |
| GEAR OUTSIDE DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| OVERALL LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| SHAFT TYPE | SHOULDERED |
| SHAFT LARGEST DIAMETER | 1.999 INCHES MINIMUM AND 2.001 INCHES MAXIMUM |
| GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
| LONGER SHAFT SEGMENT LENGTH | 6.907 INCHES MINIMUM AND 6.937 INCHES MAXIMUM |
| SHAFT LENGTH | 15.997 INCHES MINIMUM AND 16.047 INCHES MAXIMUM |
| SHAFT END TYPE | CIRCULAR GROOVED, KEYWAY WOODRUFF AND BEARING SEAT |
| SHAFT END SIZE | 0.999 INCHES AND 1.2509 INCHES |
| SPECIAL FEATURES | HELICON GEAR WITH RATIO 33.5:1; NUMBER OF THREAD STARTS 2; MATES WITH P/N H832-1662-4 (CAGE 96169); MATCHED PAIR FOR P/N H832-1662-3 AND 4 NSN 3020-01-494-0562; NEXT HIGHER ASSEMBLY NSN 3040-01-492-8053; USED ON NSSN CLASS SUBMARINE |
| SPECIFICATION/STANDARD DATA | 81349-DOD-F-24669 TO 1 GOVERNMENT SPECIFICATION |
| END ITEM IDENTIFICATION | GEARBOX, RAMMER DRIVE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRIVE INPUT |