NSN 3040-01-499-1017
Part Details | REMOTE CONTROL LEVER
3040-01-499-1017 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
Alternate Parts: H552060260, H552-0602-60, 5637066807, 563-7066807, 563706680760, 563-7066807-60, 3040-01-499-1017, 01-499-1017, 3040014991017, 014991017
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 12, 2002 | 01-499-1017 | 22099 ( LEVER, REMOTE CONTROL ) |
REFERENCE DRAWINGS & PICTURES
FLAT, ONE HOLE LINK END
Cross Reference | NSN 3040-01-499-1017
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H552-0602-60 | 96169 | ELECTRIC BOAT CORPORATION |
| 563-7066807 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 563-7066807-60 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-499-1017
| Characteristic | Specifications |
|---|---|
| MATERIAL | COPPER ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24480 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | 4 FLAT, ONE HOLE LINK END |
| OVERALL WIDTH | 4.690 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 5.000 INCHES NOMINAL |
| SHAFT END THICKNESS | 4.000 INCHES NOMINAL |
| LINK END THICKNESS | 2.501 INCHES MINIMUM AND 2.509 INCHES MAXIMUM |
| LINK END HOLE DIAMETER | 1.000 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| BORE TYPE | SPLINED |
| BORE DIAMETER | 2.149 INCHES MINIMUM AND 2.499 INCHES MAXIMUM |
| BORE LENGTH | 4.000 INCHES NOMINAL |
| SHAFT SECURING METHOD | SPLINE |
| SPECIAL FEATURES | LINK END HOLE HAS 2.000 INCH DIAMETER BOSS ON BOTH SIDES; 0.797 DIAMETER THRU HOLE IS ON SPLINE END CENTRALLY LOCATED AT 90 DEGREES TO MAIN AXIS; SIMILAR ITEM OF SUPPLY NSN:3040-01-499-1014 EXIST WITHOUT 0.797 DIAMETER HOLE |
| END ITEM IDENTIFICATION | MAIN BALLAST TANK VENT VALVE ASSEMBLY FOR LOS ANGELES CLASS SUBMARINE (688) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BELL CRANK |