NSN 3040-01-500-1764

Part Details | REMOTE CONTROL LEVER

3040-01-500-1764 A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

Alternate Parts: H84104043, H841-0404-3, 7068540, 75470685403, 754-7068540-3, 3040-01-500-1764, 01-500-1764, 3040015001764, 015001764

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30AUG 15, 200201-500-176422099 ( LEVER, REMOTE CONTROL )
REFERENCE DRAWINGS & PICTURES

FLAT, ONE HOLE LINK END

Cross Reference | NSN 3040-01-500-1764
Part Number Cage Code Manufacturer
H841-0404-396169ELECTRIC BOAT CORPORATION
706854053711NAVAL SEA SYSTEMS COMMAND
754-7068540-353711NAVAL SEA SYSTEMS COMMAND
Technical Data | NSN 3040-01-500-1764
Characteristic Specifications
MATERIAL NICKEL ALLOY
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286 FORM-7 CONDITION:ANNEALED & AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR FLAT, ONE HOLE LINK END
OVERALL WIDTH6.700 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES20.000 INCHES NOMINAL
SHAFT END THICKNESS4.525 INCHES MINIMUM AND 4.535 INCHES MAXIMUM
LINK END THICKNESS2.515 INCHES MINIMUM AND 2.520 INCHES MAXIMUM
LINK END HOLE DIAMETER2.875 INCHES NOMINAL
BORE TYPE SPLINED
MAJOR DIAMETER4.997 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
MINOR DIAMETER2.875 INCHES NOMINAL
SHAFT SECURING METHOD SPLINE
SPLINE QUANTITY9
SPECIAL FEATURESSPLINES ARE MODIFIED 10B SAE WITH ONE TOOTH NOT MACHINED, FOR TOTAL OF 9 TEETH
END ITEM IDENTIFICATIONEJECTION SYSTEM HIGH EFFICIENCY INLET LINKAGE ASSEMBLY FOR SEAWOLF CLASSSSN