NSN 3040-01-558-3895
Part Details | STRAIGHT SHAFT
3040-01-558-3895 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Alternate Parts: 4F19311103A, 4F19311-103A, 3040-01-558-3895, 01-558-3895, 3040015583895, 015583895
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 07, 2007 | 01-558-3895 | 22109 ( SHAFT, STRAIGHT ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-558-3895
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4F19311-103A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 3040-01-558-3895
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | SPLINED (STRAIGHT) |
| FIRST END DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.400 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 47 |
| END SIMILARITY | IDENTICAL |
| SECOND END DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 2.400 INCHES MINIMUM AND 2.420 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.3982 INCHES MINIMUM AND 1.4063 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.4970 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 47 |
| OVERALL LENGTH | 9.120 INCHES MINIMUM AND 9.140 INCHES MAXIMUM |
| SPECIAL FEATURES | 2 HOLES ONE IN EACH END THRU SPLIINES, DIA OF BOTH HOLES IS 0.218 TO 0.224, CENTER TO CENTER BETWEEN HOLES IS 6.930 TO 6.940, HOLE LOCATED 1.700 FROM 2ND END AND 1.410 FROM 1ST END |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT-DRIVE ARM CREW ENTRY DOOR |