NSN 3040-01-651-6829

Part Details | STRAIGHT SHAFT

3040-01-651-6829 A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

Alternate Parts: 915500004801, 915-5000048-01, 3040-01-651-6829, 01-651-6829, 3040016516829, 016516829

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
30JAN 26, 201601-651-682922109 ( SHAFT, STRAIGHT )
REFERENCE DRAWINGS & PICTURES

FLAT KEYWAY

FLAT KEYWAY

Cross Reference | NSN 3040-01-651-6829
Part Number Cage Code Manufacturer
915-5000048-011L4J7AMHERST SYSTEMS, INC.
Technical Data | NSN 3040-01-651-6829
Characteristic Specifications
MATERIAL STEEL COMP 303
FIRST END STYLE1 FLAT KEYWAY
FIRST END GROOVE WIDTH0.046 INCHES MINIMUM AND 0.049 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE1.390 INCHES NOMINAL
FIRST END DIAMETER0.750 INCHES NOMINAL
FIRST END HOLE DIAMETER0.375 INCHES NOMINAL
FIRST END DISTANCE FROM HOLE CENTER TO END0.750 INCHES NOMINAL
FIRST END HOLE DEPTH0.750 INCHES NOMINAL
FIRST END DISTANCE BETWEEN HOLE CENTERS4.500 INCHES NOMINAL
END SIMILARITY IDENTICAL
OVERALL LENGTH6.000 INCHES NOMINAL
SPECIAL FEATURESCHAMFERED EMDS 2 X 0.130 INCHES X 45.0 DEGREES
PART NAME ASSIGNED BY CONTROLLING AGENCYSHAFT,PIVOT,HARD STOP DW