Part Details | THRUST WASHER BEARING

3120-01-126-3732 An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.

Alternate Parts: 18601, 18-601, DD4833 REF NO 11, DD-4833 REF NO 11, DD4698 NO 11, DD-4698 NO 11, DD4697 REF NO 11, DD-4697 REF NO 11, DD4690 REF NO. 11, DD-4690 REF NO. 11, DD4639 NO 11, DD-4639 NO 11, DD2000 PIECE 8 PART 18601, DD-2000 PIECE 8 PART 18-601, DD1999 PART 18601, DD-1999 PART 18-601, DD1690 ITEM 8, DD-1690 ITEM 8, DD1527 PIECE 8, DD-1527 PIECE 8, DD15268, DD-1526-8, AA1972, AA-1972, 3120-01-126-3732, 01-126-3732, 3120011263732, 011263732

REFERENCE DRAWINGS & PICTURES