NSN 3416-00-758-2394
Part Details | ENGINE LATHE
3416-00-758-2394
Alternate Parts: 341624152084, 3416-2415-2084, 2439REGAL, 24-39REGAL, REGAL2439, REGAL24-39, MILL13896, 3416-00-758-2394, 00-758-2394, 3416007582394, 007582394
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1960 | 00-758-2394 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-758-2394
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2415-2084 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 24-39REGAL | 35377 | MAKINO INC |
| REGAL24-39 | 35377 | MAKINO INC |
| MILL13896 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-00-758-2394
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +2.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | LIGHT DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| BED TYPE | SLIDING GAP |
| SWING OVER CROSS SLIDE | 18.000 INCHES NOMINAL |
| RATED SWING THROUGH OPEN GAP | 52.000 INCHES NOMINAL |
| ACTUAL SWING THROUGH OPEN GAP | 36.000 INCHES NOMINAL |
| RATED SWING OVER CLOSED GAP | 26.000 INCHES NOMINAL |
| ACTUAL SWING OVER CLOSED GAP | 36.000 INCHES NOMINAL |
| DISTANCE BETWEEN OPEN CENTERS | 84.000 INCHES NOMINAL |
| DISTANCE BETWEEN CLOSED CENTERS | 48.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| HOLE DIAMETER THROUGH SPINDLE | 2.188 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | P18.0/P720.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 7.5 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | 208.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 1 CHUCK,3 JAW,10IN.;1 CHUCK,4 JAW,18IN.;COLLET CHUCK AND COLLETS;SIZES 1/16IN. THRU 1 3/8IN.;DRILL CHUCK,1/16IN. TO 1/2IN.;1 FACEPLATE 23 1/2IN.; 1FACEPLATE,GAP,38IN.;1 FACEPLATE JAW FOL 23 1/2IN. FACEPLATE;1 FACEPLATE JAW FOR 38IN. FACEPLATE;1 FOLLOW REST 1/2IN.;1 INDEXING SQUARE TOOL TURRET;1 RESELECT SPEED CHANGE;1 STEADY REST/STD/ 3/4IN. BY 7IN.;1 STEADY REST/OVERSIZE/7IN. BY 12IN.;1 TAPER ATTACHMENT 0 - 3 1/2IN.,1;TOOLS FURNISHED IN ACCORDANCE WITH MFR STD PRACTICE |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2418 TO 52 SIZE |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEADSTOCK CENTER TAPER SIZE DESIGNATOR,SPINDLE SPEED RANGE IN RPM,VOLTAGE IN VOLTS,AND ADDITIONAL EQUIPMENT PER MIL-STD 931 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY DISTANCE BETWEEN OPEN CENTERS,DIST BETWEEN CLOSED CENTERS,ELEC MOTOR QUAN,ELEC MOTOR HP RATING,CURRENT TYPE,VOLTAGE IN VOLTS,FREQ IN HERTZ,AND PHASE |