NSN 4320-01-366-9438

Part Details | HYDRAULIC MOTOR

4320-01-366-9438 A mechanical device designed to convert the energy of fluid pressure to rotary motion.

Alternate Parts: 11Y5ASY01, 11Y-5-AS-Y-01, SW24770, 11Y5ASY01, 11Y-5-AS-Y-01, 4320-01-366-9438, 01-366-9438, 4320013669438, 013669438

Supply Group (FSG)	NSN Assigned	NIIN	Item Name Code (INC)
43	NOV 04, 1992	01-366-9438	06128 ( MOTOR, HYDRAULIC )

Part Number	Cage Code	Manufacturer
11Y-5-AS-Y-01	22638	ATAP, INC.
SW24770	98255	DRS SUSTAINMENT SYSTEMS, INC.
11Y-5-AS-Y-01	0ACY8	PARKER-HANNIFIN CORPORATIONDIV HYDRAULIC PUMP/MOTOR DIVISION

Characteristic	Specifications
DISPLACEMENT TYPE	CONSTANT
SHAFT ROTATION DIRECTION	CLOCKWISE
OPERATING SPEED AT RATED CAPACITY IN RPM	328.0
MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE	2750.0PSI CONTINUOUS AND 3250.OPSI INTERMITTENT AT A KNOWN TEMPERATURE
TORQUE LOAD RATING	4081.0 INCH-POUNDS
CONSTANT DISPLACEMENT PER REVOLUTION	10.600 CUBIC INCHES
CONNECTION TYPE	INLET AND OUTLET AND DRAIN
CONNECTION QUANTITY	1
CONNECTION DESIGN	THREADED
THREAD SIZE	A0.875-14$$A0.438-20
SCREW THREAD SERIES DESIGNATOR	UNF
THREAD LOCATION	INTERNAL
THREAD DIRECTION	RIGHT-HAND
WIDTH ACROSS FLATS	0.750 INCHES NOMINAL
SQUARE END LENGTH	0.900 INCHES NOMINAL AND 0.820 INCHES NOMINAL
MOUNTING TYPE	FLANGE
MOUNTING HOLE QUANTITY	2
MOUNTING BOLT CIRCLE DIAMETER	4.180 INCHES NOMINAL
MOUNTING HOLE DIAMETER	0.540 INCHES NOMINAL
SPECIAL FEATURES	HEX SHAFT BOTH ENDS; MOTOR 4.82IN.L,4.56IN.H,4.500IN.W; MTG FLANGE SAE A-2 BOLT,5.12IN.W; OTHER END EARS 2 PLACES 180.0DEG APART,WITH 0.500-13UNC-28THD HOLES; PORTS SAE 8 O-RING LOCATED ON TOP; 7/16-20UNF O-RING PLUG;
SUPPLEMENTARY FEATURES	18.4LBS; HYDRAULIC FLUID; OPERATING TEMPERATURE -40.0DEG F TO 125.0DEG F

Browse Parts