NSN 4730-00-995-6951
Part Details | TUBE FITTING CLINCH SLEEVE
4730-00-995-6951 A flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
Alternate Parts: P8165X16, 4730009956951, MS5182510B, MS51825-10B, 4730-00-995-6951, 00-995-6951, 4730009956951, 009956951
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 47 | JAN 01, 1962 | 00-995-6951 | 18025 ( SLEEVE, CLINCH, TUBE FITTING ) |
REFERENCE DRAWINGS & PICTURES
FLARELESS
Cross Reference | NSN 4730-00-995-6951
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| P8165X16 | 79470 | DANA CORPWEATHERHEAD DIV |
| 4730009956951 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| MS51825-10B | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
Technical Data | NSN 4730-00-995-6951
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE TREATMENT | 0$DDCA000 |
| CASEHARDENING INDICATOR | NOT CASEHARDENED |
| HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 1.000 INCHES NOMINAL |
| STYLE DESIGNATOR | FLARELESS |
| OVERALL LENGTH | 0.412 INCHES MINIMUM AND 0.418 INCHES MAXIMUM |
| FLANGE WIDTH | 0.116 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| SEAT ANGLE IN DEG | 40.000 |
| SLEEVE OUTSIDE DIAMETER | 1.086 INCHES MINIMUM AND 1.090 INCHES MAXIMUM |