NSN 5310-00-451-0056
Part Details | RECESSED WASHER
5310-00-451-0056 A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED.
Alternate Parts: 3235261, 323526-1, 5310-00-451-0056, 00-451-0056, 5310004510056, 004510056
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 02, 1970 | 00-451-0056 | 15933 ( WASHER, RECESSED ) |
REFERENCE DRAWINGS & PICTURES
SPRING TENSION
Cross Reference | NSN 5310-00-451-0056
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 323526-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFTDIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
Technical Data | NSN 5310-00-451-0056
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | RCB39.0 ROCKWELL C MAXIMUM AND 43.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | 5 SPRING TENSION |
| HOLE DIAMETER | 1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 2.560 INCHES MINIMUM AND 2.570 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM |
| RECESS DIAMETER | 1.430 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| RECESS DEPTH | 0.089 INCHES NOMINAL |
| MATERIAL THICKNESS | 0.109 INCHES NOMINAL |
| RECESS ANGLE | 90.0 DEGREES NOMINAL |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| HEAT TREATMENT | AS FABRICATED |