NSN 5310-00-515-9949
Part Details | LOCK WASHER
5310-00-515-9949 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW00100TYPEAGRADE1DESIGN1, 5310-00-515-9949, 00-515-9949, 5310005159949, 005159949
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-515-9949 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-00-515-9949
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FFW00100TYPEAGRADE1DESIGN1 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 5310-00-515-9949
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | RCB40.0 ROCKWELL C MAXIMUM AND 50.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.670 INCHES MINIMUM AND 0.692 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 81348-FFW100 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 1 STYLE AND 1 COMPOSITION |