NSN 5315-01-162-5133

Part Details | HEADLESS SHOULDER PIN

5315-01-162-5133 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.

Alternate Parts: 524111P10, 524111P10, 524111, 5315-01-162-5133, 01-162-5133, 5315011625133, 011625133

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53SEP 20, 198301-162-513316749 ( PIN, SHOULDER, HEADLESS )
REFERENCE DRAWINGS & PICTURES

CHAMFERED

COUNTERSUNK

CHAMFERED

COUNTERSUNK

UNDERCUT

Cross Reference | NSN 5315-01-162-5133
Part Number Cage Code Manufacturer
524111P1061062COMET MFG CO INC
524111P1077445UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS
52411177445UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS
Technical Data | NSN 5315-01-162-5133
Characteristic Specifications
STYLE DESIGNATOR UNDERCUT
SHANK LENGTH0.055 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
SHOULDER DIAMETER0.4006 INCHES MINIMUM AND 0.4011 INCHES MAXIMUM
SHANK DIAMETER0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
OVERALL LENGTH1.400 INCHES NOMINAL
UNDERCUT DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
UNDERCUT WIDTH0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
FIRST END STYLE COUNTERSUNK
FIRST END COUNTERSINK DIAMETER0.170 INCHES NOMINAL
FIRST END COUNTERSINK ANGLE55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM
SECOND END RELATIONSHIP WITH FIRST END NOT IDENTICAL
SECOND END STYLE2 CHAMFERED
SECOND END TAPER LENGTH0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
SECOND END COUNTERSINK DIAMETER0.170 INCHES NOMINAL
SECOND END TAPER ANGLE28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM
SECOND END COUNTERSINK ANGLE55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM
FIRST END LOCATION SHANK END
SPECIAL FEATURESCOUNTERSUNK HOLES 0.160 IN. DP
CRITICALITY CODE JUSTIFICATIONAAVH