NSN 5315-01-162-5136
Part Details | HEADLESS SHOULDER PIN
5315-01-162-5136 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 524127P5, 524127P5, 524127P5, 5315-01-162-5136, 01-162-5136, 5315011625136, 011625136
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 20, 1983 | 01-162-5136 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
UNDERCUT
Cross Reference | NSN 5315-01-162-5136
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 524127P5 | 1A249 | ACCURATE THREADED PRODUCTS COMPANYTHE |
| 524127P5 | 21128 | JDMC ENTERPRISESDBA HIGH SPEED MACHINE PRODUCTS |
| 524127P5 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5315-01-162-5136
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.070 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.7225 INCHES MINIMUM AND 0.7230 INCHES MAXIMUM |
| SHANK DIAMETER | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| OVERALL LENGTH | 2.210 INCHES MINIMUM AND 2.230 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 28.0 DEGREES MINIMUM AND 32.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHOULDER END |
| SPECIAL FEATURES | 0.375 IN. DIA,1.910 IN. DP HOLE CENTERED IN SHOULDER END |
| CRITICALITY CODE JUSTIFICATION | AAVH |