NSN 5315-01-175-3910
Part Details | HEADED STRAIGHT PIN
5315-01-175-3910 A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
Alternate Parts: 9942M96P01, 5315-01-175-3910, 01-175-3910, 5315011753910, 011753910
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAR 30, 1984 | 01-175-3910 | 02384 ( PIN, STRAIGHT, HEADED ) |
REFERENCE DRAWINGS & PICTURES
BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
ONE END DRILLED
STRAIGHT
Cross Reference | NSN 5315-01-175-3910
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9942M96P01 | 07482 | GENERAL ELECTRIC COMPANYDBA GE |
Technical Data | NSN 5315-01-175-3910
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | STRAIGHT |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| DIAMETER | 0.246 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| HEAD STYLE | 1 BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE) |
| WIDTH ACROSS FLATS | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 0.400 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| HEIGHT | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.095 INCHES NOMINAL |
| SPECIAL FEATURES | SHANK IS FLATTED TWO SIDES 0.190 IN. WIDTH ACROSS FLATS AND PARALLEL W/WRENCH FLATS ON HEAD |