NSN 5315-01-194-9353
Part Details | HEADED SHOULDER PIN
5315-01-194-9353 A cylindrically-shaped headed item, having a solid shank in steps of two or more different diameters under and in addition to the head. Excludes PIN, ECCENTRIC.
Alternate Parts: 75A6100142009, 75A610014-2009, 75A6100142005, 75A610014-2005, 75A6100142001, 75A610014-2001, 75A6100172009, 75A610017-2009, 75A6100142009, 75A610014-2009, 75A6100142005, 75A610014-2005, 5315-01-194-9353, 01-194-9353, 5315011949353, 011949353
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 20, 1984 | 01-194-9353 | 16563 ( PIN, SHOULDER, HEADED ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
DEE
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-194-9353
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 75A610014-2009 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 75A610014-2005 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 75A610014-2001 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 75A610017-2009 | 6Z056 | CM MANUFACTURING, INC. |
| 75A610014-2009 | 6Z056 | CM MANUFACTURING, INC. |
| 75A610014-2005 | 25472 | GOODRICH CORPORATION |
Technical Data | NSN 5315-01-194-9353
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| UNDER HEAD LENGTH | 2.322 INCHES NOMINAL |
| FIRST STEP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7485 INCHES MAXIMUM |
| FIRST STEP LENGTH | 1.820 INCHES MINIMUM AND 1.830 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.2435 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.492 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| HEAD STYLE | DEE |
| DISTANCE FROM CENTERLINE TO FLAT | 0.579 INCHES MINIMUM AND 0.589 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 1.350 INCHES NOMINAL |
| HEIGHT | 0.120 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.172 INCHES NOMINAL |
| SPECIAL FEATURES | HEAD HAS PROTRUSION ALONG FLAT 0.164 IN. W AND 0.060 IN. H ALONG FLAT; 2ND STEP THREADED 0.250-28 UNJF 3A TO GROOVE 0.191 IN. DIA AND 0.108 IN. W; HEAD DRILLED 0.404 IN. MIN AND 0.411 IN. MAX DIA TO 1.390 IN. DP |