NSN 5315-01-257-7799
Part Details | HEADLESS STRAIGHT PIN
5315-01-257-7799 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: U43490, 5315-01-257-7799, 01-257-7799, 5315012577799, 012577799
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 23, 1987 | 01-257-7799 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-01-257-7799
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| U43490 | 75160 | DEERE & CO |
Technical Data | NSN 5315-01-257-7799
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.080 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.720 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 9.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.406 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.406 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.430 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.250 INCHES NOMINAL |
| PIN OVERALL LENGTH | 5.120 INCHES MINIMUM AND 5.240 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 1.5000 INCHES NOMINAL |