NSN 5315-01-305-7678
Part Details | HEADLESS SHOULDER PIN
5315-01-305-7678 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 12344946, 5315-01-305-7678, 01-305-7678, 5315013057678, 013057678
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | AUG 11, 1989 | 01-305-7678 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-305-7678
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12344946 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-01-305-7678
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 4.640 INCHES NOMINAL |
| SHOULDER DIAMETER | 1.500 INCHES NOMINAL |
| SHANK DIAMETER | 0.740 INCHES MINIMUM AND 0.742 INCHES MAXIMUM |
| OVERALL LENGTH | 6.780 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.640 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.190 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHORT SHANK END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.165 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.165 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.130 INCHES NOMINAL |