NSN 5315-01-341-4282
Part Details | HEADLESS SHOULDER PIN
5315-01-341-4282 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 855017B0460, 57307613, 5315-01-341-4282, 01-341-4282, 5315013414282, 013414282
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 28, 1991 | 01-341-4282 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-341-4282
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 855017B0460 | 0CA08 | ATLAS COPCO |
| 57307613 | 0CA08 | ATLAS COPCO |
Technical Data | NSN 5315-01-341-4282
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.993 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SHOULDER DIAMETER | 1.500 INCHES NOMINAL |
| SHANK DIAMETER | 4.000 INCHES NOMINAL |
| OVERALL LENGTH | 6.750 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 1.240 INCHES MINIMUM AND 1.246 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 2.440 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.130 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | LONG END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.201 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.201 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.250 INCHES NOMINAL |