NSN 5315-01-351-1980
Part Details | HEADLESS SHOULDER PIN
5315-01-351-1980 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 5836743673 PC42, 583-6743673 PC42, 5315-01-351-1980, 01-351-1980, 5315013511980, 013511980
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 02, 1992 | 01-351-1980 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
SHOULDER
Cross Reference | NSN 5315-01-351-1980
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 583-6743673 PC42 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 5315-01-351-1980
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| FIRST STEP DIAMETER | 1.997 INCHES MINIMUM AND 1.999 INCHES MAXIMUM |
| FIRST STEP LENGTH | 2.875 INCHES NOMINAL |
| SECOND STEP DIAMETER | 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| SECOND STEP LENGTH | 1.562 INCHES NOMINAL |
| THIRD STEP DIAMETER | 1.624 INCHES MINIMUM AND 1.628 INCHES MAXIMUM |
| THIRD STEP LENGTH | 2.188 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | 4 CHAMFERED |
| SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHANK END |
| SPECIAL FEATURES | THREE WRENCHING HOLES 0.250 IN. ON THIRD STEP DIA;0.266 IN. WIDE AXIAL LOCKING GROOVE; PERPENDICULAR THRU HOLE INTERSECTED BY LONGITUDINAL HOLES |