NSN 5315-01-357-3976
Part Details | HEADLESS SHOULDER PIN
5315-01-357-3976 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 787AS8172, 787AS817-2, 5315-01-357-3976, 01-357-3976, 5315013573976, 013573976
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | APR 22, 1992 | 01-357-3976 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-357-3976
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 787AS817-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 5315-01-357-3976
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 1.640 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| SHANK DIAMETER | 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | LONG END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.560 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.410 INCHES MINIMUM AND 2.440 INCHES MAXIMUM |