NSN 5315-01-371-4774
Part Details | HEADLESS STRAIGHT PIN
5315-01-371-4774 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 12412461, 12412461, 12412461, 12412461, 12412461, 5315-01-371-4774, 01-371-4774, 5315013714774, 013714774
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 14, 1993 | 01-371-4774 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-01-371-4774
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12412461 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 12412461 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMSLP |
| 12412461 | 65459 | LANDOLL CORPORATION |
| 12412461 | 81381 | STEWART & STEVENSON POWER PRODUCTSLLC |
| 12412461 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-01-371-4774
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.124 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.110 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.310 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.930 INCHES NOMINAL |
| PIN OVERALL LENGTH | 9.250 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL |