NSN 5315-01-411-8704
Part Details | HEADLESS SHOULDER PIN
5315-01-411-8704 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 1BN3150, 5315-01-411-8704, 01-411-8704, 5315014118704, 014118704
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | APR 04, 1995 | 01-411-8704 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
SHOULDER
Cross Reference | NSN 5315-01-411-8704
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1BN3150 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5315-01-411-8704
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.555 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| SHANK DIAMETER | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| OVERALL LENGTH | 0.720 INCHES NOMINAL |
| FIRST END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 10.0 DEGREES MINIMUM AND 20.0 DEGREES MAXIMUM |
| FIRST END LOCATION | CHAMFERED END |
| SPECIAL FEATURES | PIN IS COAT WITH POLYMER COMPOSITE; SURFACE ROUGHNESS 32; HEAT TREAT AT 1024 DEGREE (F); PLUS/MINUS 15 DEGREES (F) FOR 4 HOURS BEFORE COATING |