NSN 5315-01-450-1125
Part Details | HEADLESS STRAIGHT PIN
5315-01-450-1125 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 12470483, 5315-01-450-1125, 01-450-1125, 5315014501125, 014501125
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 28, 1997 | 01-450-1125 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
POINTED
SQUARE
POINTED
SQUARE
Cross Reference | NSN 5315-01-450-1125
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12470483 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-01-450-1125
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | POINTED |
| FIRST END TAPER LENGTH | 4.000 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 10.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| SECOND END TAPER LENGTH | 0.500 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 90.0 DEGREES NOMINAL |
| PIN OVERALL LENGTH | 5.020 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.6100 INCHES NOMINAL |
| SPECIAL FEATURES | PIN IS 5.03 INCHES LONG OVERALL, .610 INCHES IN DIAMETER. ROUND OVERALL WITH A FLAT SURFACE ON ONE SIDE WITH A SLIGHT TAPER FROM TIP TO OPPOSITE END. FEATURES FOUR HOLES OF .154 INCHES DIAMETER DRILLED PERPENDICULAR TO LENGTH ON THE SMALLER END.HOLES ARE APPROX. .50 FROM THE TIP AND .594 INCHES CENTER TO CENTER. FEATURES ONE HOLE OF .279 INCHES DIAMETER DRILLED PERPENDICULAR TO LENGTH AT LARGEST END AND OFFSET .120 IN. FROM OUTSIDE EDGE. |
| END ITEM IDENTIFICATION | COUNTERMINE EQUIPMENT |