NSN 5315-01-467-8380
Part Details | HEADLESS SHOULDER PIN
5315-01-467-8380 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 92007A1156, 5315-01-467-8380, 01-467-8380, 5315014678380, 014678380
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 16, 1999 | 01-467-8380 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
RADIUS
CHAMFERED
RADIUS
SHOULDER
Cross Reference | NSN 5315-01-467-8380
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 92007A1156 | 01365 | MARINE CORPS LOGISTICS COMMANDTECHNICAL DATA REPOSITORY |
Technical Data | NSN 5315-01-467-8380
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.188 INCHES NOMINAL |
| SHANK DIAMETER | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| OVERALL LENGTH | 0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | RADIUS |
| SECOND END CORNER RADIUS | 0.005 INCHES MAXIMUM |
| FIRST END LOCATION | CHAMFERED END |
| SPECIAL FEATURES | END ITEM LIGHT ARMORED VEHICLE;CHAMFER WIDTH0.030 NOMINALLY;HEAT TREATMENT PER MIL-H-6875,QUENCH AND TEMPER AT A MAX TEMP OF 450 DEGREES F FOR A MINIMUM OF 56 ROCKWELL C;UNLESS OTHERWISE SPECIFIED,THE RELATIONSHIP BETWEEN ANY TWO COAXIAL CIRCULAR FEATURES SHALL BE CONTROLLED BY A CIRCULAR RUNOUT TOLERANCE EQUAL TO THE SUM OF THE SIZE TOLERANCES FOR THE FEATURES |