NSN 5315-01-471-8095

Part Details | HEADLESS SHOULDER PIN

5315-01-471-8095 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.

Alternate Parts: 9540781, 954078-1, 5315-01-471-8095, 01-471-8095, 5315014718095, 014718095

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53FEB 15, 200001-471-809516749 ( PIN, SHOULDER, HEADLESS )
REFERENCE DRAWINGS & PICTURES

CHAMFERED

CHAMFERED

UNDERCUT

Cross Reference | NSN 5315-01-471-8095
Part Number Cage Code Manufacturer
954078-11P175ENCORE INTERIORS, INC.
Technical Data | NSN 5315-01-471-8095
Characteristic Specifications
STYLE DESIGNATOR UNDERCUT
SHANK LENGTH0.429 INCHES NOMINAL
SHOULDER WIDTH ACROSS FLATS0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
SHANK DIAMETER0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
OVERALL LENGTH2.116 INCHES NOMINAL
UNDERCUT DIAMETER0.415 INCHES NOMINAL
UNDERCUT WIDTH0.001 INCHES MINIMUM AND 0.011 INCHES MAXIMUM
SECOND SHANK DIAMETER0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM
SECOND SHANK LENGTH1.500 INCHES NOMINAL
FIRST END STYLE CHAMFERED
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END IDENTICAL
SECOND END TAPER LENGTH0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
SECOND END TAPER ANGLE15.0 DEGREES NOMINAL
FIRST END LOCATION THREADED END
THREAD SERIES DESIGNATOR UNF
NOMINAL THREAD SIZE0.500 INCHES
THREAD QUANTITY PER INCH20
THREAD CLASS2A
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.435 INCHES NOMINAL
SPECIAL FEATURESSHOULDER OF THE ITEM IS LOCATED 0.10 INCH BELOW THE GROOVE.
END ITEM IDENTIFICATIONC-17A
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN, ALIGNMENT