NSN 5315-01-474-3125
Part Details | HEADLESS SHOULDER PIN
5315-01-474-3125 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 12987586, 5315-01-474-3125, 01-474-3125, 5315014743125, 014743125
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 01, 2000 | 01-474-3125 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
RADIUS
CHAMFERED
RADIUS
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-474-3125
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12987586 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 5315-01-474-3125
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 3.745 INCHES NOMINAL |
| SHOULDER DIAMETER | 1.238 INCHES MINIMUM AND 1.243 INCHES MAXIMUM |
| SHANK DIAMETER | 0.225 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| OVERALL LENGTH | 6.120 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | RADIUS |
| SECOND END CORNER RADIUS | 0.060 INCHES NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.495 INCHES NOMINAL |
| SPECIAL FEATURES | DIMETIONS APPLY AFTER PLATING;BREAK SHARP EDGES;ZINC-NICKEL COAT, TYPE 2, CLASS 2 PER DRAWING12369857;OPTIONAL FINISH, ZINC COAT, TYPE 2, 0.3 MILS THICK MINIMUM;CENTERS PERMISSIBLE;SECOND END IT TAPERS TO 0.675 IN DIAMETER;SECOND END RADIUS AFTER SHANK IS .06 THEN RADIUS OF .12 THEN .06 AT END;5.625 LENGTH FROM CENTER OF HOLE TO SECOND END;SECOND END FIRST DIAMETER IS 1.243 THEN TAPER TO A DIAMETER OF 0.675 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, LOCKING, SUPPORT |