NSN 5315-01-478-6134

Part Details | HEADLESS SHOULDER PIN

5315-01-478-6134 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.

Alternate Parts: 815933, 5315-01-478-6134, 01-478-6134, 5315014786134, 014786134

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53SEP 20, 200001-478-613416749 ( PIN, SHOULDER, HEADLESS )
REFERENCE DRAWINGS & PICTURES

CHAMFERED

CHAMFERED

SHOULDER

Cross Reference | NSN 5315-01-478-6134
Part Number Cage Code Manufacturer
81593377445UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS
Technical Data | NSN 5315-01-478-6134
Characteristic Specifications
STYLE DESIGNATOR SHOULDER
SHOULDER DIAMETER0.520 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
OVERALL LENGTH2.540 INCHES NOMINAL
SECOND STEP DIAMETER0.335 INCHES MINIMUM AND 0.345 INCHES MAXIMUM
SECOND STEP LENGTH1.020 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
THIRD STEP DIAMETER0.184 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
THIRD STEP LENGTH0.830 INCHES MINIMUM AND 0.860 INCHES MAXIMUM
SHOULDER LENGTH0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
FIRST STEP WIDTH ACROSS FLATS0.313 INCHES NOMINAL
FIRST END STYLE CHAMFERED
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END IDENTICAL
SECOND END TAPER LENGTH0.020 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
SECOND END TAPER ANGLE45.0 DEGREES NOMINAL
FIRST END LOCATION THREADED END
THREAD SERIES DESIGNATOR UNS
NOMINAL THREAD SIZE0.3125 INCHES
THREAD QUANTITY PER INCH24
THREAD CLASS3A
THREAD PITCH DIAMETERS+0.2797 TO +0.2824 INCHES
THREAD DIRECTION RIGHT-HAND
THREAD LENGTH0.435 INCHES NOMINAL
SPECIAL FEATURESTHRU HOLES AT BOTH ENDS 0.065-0.072 IN. DIA
END ITEM IDENTIFICATIONENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H)
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN-NO. 1 BEARING SEAL