NSN 5315-01-486-0948
Part Details | HEADLESS STRAIGHT PIN
5315-01-486-0948 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: AN253182, AN253-1-82, MS20253, MS20253182, MS20253-1-82, 5315-01-486-0948, 01-486-0948, 5315014860948, 014860948
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 18, 2001 | 01-486-0948 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
Cross Reference | NSN 5315-01-486-0948
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AN253-1-82 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| MS20253 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS20253-1-82 | 0U583 | SAE INTERNATIONAL |
Technical Data | NSN 5315-01-486-0948
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND END TAPER LENGTH | 0.015 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| PIN OVERALL LENGTH | 0.820 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.0770 INCHES MINIMUM AND 0.4700 INCHES MAXIMUM |
| SPECIAL FEATURES | FOR USE WITH HINGES COVERED BY MS20257 AND MS20001 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,HINGE |