NSN 5315-01-489-5825
Part Details | HEADLESS SHOULDER PIN
5315-01-489-5825 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 322163, 32216-3, 5315-01-489-5825, 01-489-5825, 5315014895825, 014895825
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 17, 2001 | 01-489-5825 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-01-489-5825
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 32216-3 | 07070 | NAVY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 5315-01-489-5825
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 6.488 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.998 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| SHANK DIAMETER | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| OVERALL LENGTH | 8.988 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.250 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 58.0 DEGREES MINIMUM AND 62.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END LOCATION | LARGE END |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.257 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.400 INCHES NOMINAL |
| SPECIAL FEATURES | PIN GROOVED 3.008 IN. FROM SECOND END .046 IN X .704 IN DIA |
| END ITEM IDENTIFICATION | LATCHING DEVICE ASSEMBLY AN/ALQ-141, AQS-14 CRADLE |